MICRO TOPPING is a cement based, polymer modified decorative concrete topping material. This single component micro topping is a thinly applied topping that closely resembles the look of natural concrete.

• High bond, flexural and compressive strength. Consistant and evenly textured finish.
• Can be integrally colored with EZCHEM EZ COLOR PAKS.
• Can be stained with EZCHEM ENVIRO STAIN or EARTHTONE STAIN for a wide array of decorative finishes.
• Can be sealed with EZCHEM CLEAR ACRYLIC SEALER or COLORED ACRYLIC SEALER for a consistently colored and durable surface.

One 40 pound bag of Micro Topping will require approximately 7 1/2 to 8 quarts of water. For best results use a 1/2 inch drill with a Jiffy type mixing paddle. Add the measured water to a clean 5 - gallon pail. Add one EZ Color Pak pigment pack to your measured water and mix in. With the mixer running, slowly add the Micro Topping powder, mixing until a lump free consistency is obtained. Allow the mixed material to set, or slake for approximately 5 minutes and then re-mix prior to placement. Mix only the amount of material that can be placed within 30 minutes of mixing. Keep bagged material and mixed material out of direct sunlight for added work time. Use cold water when mixing for added working time. In cooler conditions, use warm water when mixing. Consult product technical data sheet for surface preparation and installation